dryve motor control system - select, click, control...
 
Travel distances, positions, speeds, operating times - easily defined with the new igus® web-based control system for Room linear robot and 3-axis delta robot.

• No software or app installation necessary, fast commissioning
• Control possible via smartphone (browser), tablet or laptop
• Simple and intuitive user interface, control system set up in just a few minutes
• Compatible with numerous industrial controllers (e.g. Siemens S7/Beckhoff)
• For DC, EC and stepper motors
• Cost-effective

TEST BEFORE INVEST - Try out the motor control system with online simulation here before you buy.

Ready to use immediately
The dryve motor control system can either be connected to your network or you can connect it directly to the control unit (PC or PLC) by means of a network cable.
You can then call up the control system directly in the browser without installing any software.
Settings can therefore be made in one minute.

Easy control
You can use the simple intuitive user interface to parameterise travels, position,
speed and operating time of your linear axis even as an amateur. Movements that are continuously repeated
are known as "looping" and can be set in just a few seconds. A teach function enables position settings to be made with just one mouse click.

Industry standards
Due to standardised communication protocols such as CANopen or Modbus TCP as gateway,
it is very easy to connect the system to industrial controllers, such as the Siemens S7 or Beckhoff.
The ten digital inputs and five outputs enable extremely easy communication with industrial controllers  
but also with low-price open-source modules, such as Arduino or Raspberry Pi.

Powerful technology
dryve supports DC, EC and stepper motors both in open loop and closed loop technology.
 
The supply voltage of up to 48V ensures high motor speeds. The nominal current
of 7A and the peak current of 21A results in powerful and dynamic movements.