Turnkey solution for e-chain E4-28 | for inner width up to 300 mm | for chain length from 10 m to 30 m

This smart plastics complete set for retro-fitting consists of:

i.Sense components for condition monitoring: 
  • i.Sense EC.P for monitoring the push/pull forces 
  • i.Sense EC.B for breakage monitoring
  • i.Sense:module II for installation in the switch cabinet
  • Connection cables

i.Cee components for predictive maintenance: 
  • i.Cee:plus module II
  • i.Cee LIVE Dashboard on the local network
  • SMS Module: For alerting without http connection 
  • Wear sensors
Product description
Product Description:
  • Permanent monitoring of the pull/push forces by i.Sense EC.P sensors on the moving end
  • Monitoring of the energy chain for breakage (i.Sense EC.B)
  • Evaluation of the sensor data in the module
  • Fast information to SPS / PLC in case of unusual events
  • Calculation of service life based on actual use (determined via wear sensors)
  • Maintenance management
  • SMS - Alerting

Application Parameters:
  • Sliding mounted e-chain E4-28
  • Centre fixed
  • Inner width up to 300 mm
  • Switch cabinet position on the moving (MN) or fixed end (FP)
  • Motion profile recording via customer SPS / PLC

This smart plastics product set for retro-fitting does not contain the base product, the e-chain itself. Pricing excludes copper supplement for cables.
Technical data
Downloads

Application Assistance

Photo
Dan Thompson

Product Manager

Email

Customer Service:

Monday to Friday from 8 am - 8 pm

Online:

24h


The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsibushi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention in this website. The products offered by igus® are those of igus® GmbH

igus inc headquarters is located at 257 Ferris Ave, Rumford, RI 02916. igus enjoyneering center is located at 2055 Franklin Rd, Bloomfield Twp, MI 48302