Change Language :
palletizing cobot

Flexible cable guidance for palletizing cobot

Cobot palletizing

For palletising, the ProPak1.4 station uses a cobot from Universal Robots. Additional cables and pneumatic hoses must be guided on the cobot for the application. The TRE.40.058.0.B  in combination with the UR clamps provides this guidance

Problem

The additionally required hoses and cables were attached to the arm of the robot using standard cable ties. The partly very firm and static attachment to the robot arm resulted in:

  • Higher load on the motors, which led to irregular stoppages of the cobot.
  • Hoses and cables chafe through at the fixing points.
  • Pneumatic hose comes loose at the connections.
Learn more

Mr. Janosz confirms that by guiding the hoses and cables with the help of TRE.40.058.0.B, the problems mentioned above have been eliminated. Cobots react very sensitively to increased tension or pressure, which is controlled by the correct cable guidance using TRE.40.058.0.B. From now on the cable ties are used for the correct strain relief and not for fixing the cables and hoses.

The robot now moves much more freely, almost gracefully.

Mr. Janosz

Every Cobot should be equipped with this solution as standard

Mr. Janosz

Free samples and downloads

triflex 10 tips

10 tips for energy supply on the robot

Download now
Robotics cable carrier catalog:

Robotics cable carrier catalog:

Download now
triflex sample box

Free triflex® R Sample Box

Order now

Discuss your project with a robot dresspack expert

Whether you're interested in end-to-end, fully assembled solutions or looking to build your own customizable project, let us assist you with a solution based on your specific application and requirements. Contact us via the form below or call us at (800) 521-2747  to discuss your project today!