Series P4-80

Low maintenance roller e-chain system® with tribo-optimized plastic rollers

Comb-like auto-glide crossbars

Special design of the rollers and chain links therefore particularly quiet

Top and bottom run roll offset on top of each other

Same pitch on roller/chain links

4 Inner height: 1.26", 1.65", 2.21" and 3.15" available

A1 = Moving end

A2 = Fixed end

B1 = Moving end

B2 = Fixed end

B3 = Guide trough with glide rail

B4 = Guide trough without glide rail

B5 = Total length of guide trough

S = Travel

R = Bending radius

H = Nominal installation height

HF = Necessary clearance height

HRI = Trough inner height

D = projection, radius end position

K = π • R + "safety"

D2 = Überstand bei langenVerfahrwegen, gleitend

K2 = *surcharge

H2 = *Installation height

∆CL = Fixed-point offset

*with lowered moving end

Long travels

from 33 ft to max. 1,969 ft

Max. rolling speed/max. rolling acceleration

max. 10 [m/s] / max. 50 [m/s²]

Fill weight

max. 7,00 [kg/m]

Material - permitted temperature °F

igumid G / -40° up to +248° F

Flammability class, igumid G

VDE 0304 IIC UL94 HB

Series P4-80 - Interior separation

Standard - for all applications

Separator, wide foot for maximum holding force and safe standing in e-chains®

Faster cable asssembly

One side fixed seating with wide base, narrow opposite side for easy cable installation (easily clamped).

For many thin cables

Separator with narrow base for many thin cables lying next to each other. Space-saving, stable - for e-chains®.

Locks securely in 5mm steps

Locking separator for the locking crossbar with scale. For exact positioning

Horizontal partitioning

Locks in securely on both ends of the separator, fixed widths possible. Can be used as full-width shelf for integrated subdivision or as shelf for a rack-like separation in 5 planes.

P4-80 - mounting brackets plastic/steel pivoting

For pivoting connections

Secure attachment to your application

Same kit (2-piece) for all e-chain® widths

Electrically conducting