ZLW-10120 flat corrosion-resistant stainless steel toothed belt axis

Robust and versatile use even in smaller installation sizes

igus has developed the ZLW linear axis in stainless steel for this purpose
In order to be able to provide a stainless steel linear axis for smaller installation spaces, igus® has developed the ZLW 10 series. Optionally, it can be supplied ready for connection to stepper or DC motors, so that the installation effort is as low as possible. With the two single rails, the linear axis is significantly lighter and it saves weight.

ZLW-ES - tested and proven: goal achieved with more than 1,000,000 cycles

ZLW stainless steel
Motor: servo motor and gearbox
Load: 1,000N
Stroke: 2,500mm
Speed: 1m/s
Specification: 1,000,000 cycles
Test end: 1,124,744 cycles
Target reached: YES

Hygienic, robust with low installation height

The drylin® toothed belt axis series is extended by a new modular version for installation size 10. The low profile linear axis ZLW-10120 with 120mm width is completely made of stainless steel and has an installation height of only 40mm. Based on the drylin® W stainless steel profile guide, the linear carriage is driven by a neoprene toothed belt and is ready-to-connect to drylin E stepper or DC motors.

The linear axis is corrosion-resistant and particularly suitable for contact with water and media and in environments requiring intensive cleaning. The robust construction with self-lubricating drylin® W linear plain bearings ensures a long service life and maintenance-free operation.
Stroke lengths up to 2,000mm

Maintenance-free due to self-lubricating high-performance polymers
Corrosion-resistant due to 304 (AISI 304) and 316 (AISI316/316TI) stainless steel
Can be configured with drylin® E stepper and DC motors
Motor control system with dryve D1 available

Technical data and dimensions [mm]

Part No.	max. stroke length [mm]	Transmission [mm/rev]	Tooth profile	Toothed belt material	Toothed belt tension [N]	[kg]	Weight (per 100mm) [kg]
ZLW-10120-ES	2000	75	3M	Neoprene with fibre glass	200	4.7	0.25
ZLW-10160-ES	2000	75	3M	Neoprene with fibre glass	200	5.2	0.35
ZLW-10200-ES	2000	75	3M	PU with stainless steel	200	5.9	0.45

Part No.	A	Al	h	E2	E3	E4	C4	f	lt	ha	lz	l	d2
ZLW-10120-ES	153	150*	40	140	Al-137	40	240	1	74	18	18	298	10
ZLW-10160-ES	193	150*	40	180	Al-177	90	240	1	74	18	18	298	10
ZLW-10200-ES	233	150*	40	220	Al-217	120	240	1	74	18	18	298	10

Part No.	d3	g3	D	K for DIN912-M6	at	lt2	lu	V [mm/rev] Standard
ZLW-10120-ES	38	M4	10	M6	43	59	20	75
ZLW-10160-ES	38	M4	10	M6	43	59	20	75
ZLW-10200-ES	38	M4	10	M6	43	59	20	75

Tech up

System height of only 40mm with new installation size Ø 10
High corrosion resistance due to parts made from 1.4301 (AISI 304) and 1.4571 (AISI 316Ti)
Variable stroke lengths up to 2,000mm
For different system widths
Cleaning-friendly design