Change Language :

Assembly Instructions for energy chain System E6

Assembling

System E6 Assembly

Position side links, gently twist...

Position side links, gently twist

System E6 Assembly

... and snap in

snap in

System E6 Assembly

Gently reinsert connector by using hammer

Gently reinsert connector by using hammer

System E6 Assembly

Position crossbars, push down and snap in

Position crossbars, push down and snap in

Separating

System E6 Assembly

Lever crossbars with screwdriver

Lever crossbars with screwdriver

System E6 Assembly

Tap gently to remove connectors

Tap gently to remove connectors

System E6 Assembly

Twist and...

Twist

System E6 Assembly

...separate side links

separate side links

Assembling lids - E-Tubes

System E6 Assembly

Opening: Insert lid

Opening: Insert lid

System E6 Assembly

Closing: Push down and snap in

Closing: Push down and snap in

System E6 Assembly

Lever with screwdriver...

Lever with screwdriver

System E6 Assembly

...and remove lids by hand

and remove lids by hand

Assembly instructions for energy chain System E6-1

mont_E61_01

Opening: Insert lid

Remove the opening cross bars by hand or screw driver. Repeat the process on the lower side

mont_E61_02

Closing: Push down and snap in

Disassemble a total of 2 opening cross bars on each side to complete the separation

System E6 Assembly

Lever with screwdriver...

Push the connection pin out using a screw driver. Repeat the process on the opposing side

System E6 Assembly

...and remove lids by hand

Rotate the Energy Chains apart until the interlocks between the chain links disengage. Repeat the process on the opposing side

Overview of Assembly Instructions for igus® e-chains®

  • Small e-chains® 
  • Medium e-chains®
  • Large e-chains®
  • Multi-axis e-chains®
  • Low noise e-chains®
  • Special e-chains®

    • Discuss your project with an expert

    Whether you're interested in end-to-end, fully assembled solutions or looking to build your own customizable project, let us assist you with a solution based on your specific application and requirements. Contact us via the form below or call us at (800) 521-2747  to discuss your project today!