Change Language :
R2.1 e-tube: Cost-effective Cable Tubing for Chip Protection
Cost-effective, strong e-tubes with 26 mm, 40 mm and 75 mm inner height. Lids snap-open along both sides and can be removed. Very sealed design and strong double stop dogs for high fill weights and unsupported lengths.
Advantages of the R2.1 system:
- Large inner height and therefore cost-effective
- Cables are protected from swarf
- Easy to fill, lids openable from both sides along the inner or outer radius
- Low noise operation due to integrated brake
- Separator notches integrated into the e-tube link and lid for side-mounted applications
The video shows how simple it is to assemble Series R2.75 e-chains®
e-tubes made from igumid HT material for hot swarf of up to +850 °C available upon request
Electrically conductive ESD e-tubes available upon request
UL94-V0 classifications upon request
Lids openable from both sides along the outer radius
R2.26
Inner height hi: 26 mm
Inner widths Bi: 25 - 150 mm
Bend radii R: 60 - 175 mm
Unsupported length: max. 2.00 m
R2.40
Inner height hi: 40 mm
Inner widths Bi: 50 - 200 mm
Bend radii R: 80 - 250 mm
Unsupported length: max. 2.75 m
Lids openable from both sides along the inner radius
R2i. 26
Inner height hi: 26 mm
Inner widths Bi: 25 - 150 mm
Bend radii R: 60 - 175 mm
Unsupported length: max. 2.00 m
R2i. 40
Inner height hi: 40 mm
Inner widths Bi: 50 - 200 mm
Bend radii R: 80 - 250 mm
Unsupported length: max. 2.75 m
R2i. 48
Inner height hi: 48 mm
Inner widths Bi: 50 - 250 mm
Bend radii R: 100 - 250 mm
Unsupported length: max. 2.75 m
R2.48
Inner height hi: 48 mm
Inner widths Bi: 50 - 250 mm
Bend radii R: 100 - 250 mm
Unsupported length: max. 2.75 m
R2.75
Inner height hi: 75 mm
Inner widths Bi: 111 - 200 mm
Bend radii R: 130 - 400 mm
Unsupported length: max. 3.00 m
e-chain® cable carrier online tools
Contact an Expert
Whether you're interested in end-to-end, fully assembled solutions or looking to build your own customizable project, let us assist you with a solution based on your specific application and requirements. Contact us via the form below or call us at (800) 521-2747 to discuss your project today!