Change Language :
Three-piece e-chain® with many new ideas - the igus® system E3 combines small pitch, silent operation, low noise, stability, simple installation and cost efficiency. The resilient element replaces the pin-bore system as connector and prevents relative movements between the joints. For this reason, a complete freedom from wear is attained (clean room). In order to reduce the manufacturing and assembly costs, the spring clip is mounted not individually, but at a length of 10 chain links.
An elastic band links crossbars and separators and speeds up the installation
Separators on the band for the partitioning of the chain cross-section.
The universal strain relief can be individually adapted in the chain width.
Inner height hi: 22 mm
Inner widths Bi: 20 - 60 mm
bending radii R: 44 - 75 mm
Pitch: 16,7 mm
The cycle times are always shorter in the automation, whereas the requirements in noise reduction, service life, vibration dampening are always higher. For this wide area of small e-chain®, igus® now introduces the E3 system product range that completely caters to these requirements:
iF -Design Award 2005
IPA classification - Report IG0704-400:: ISO Class 1, according to DIN EN ISO 14644-1 for system E3, Series E3.15.040.075.0 at v = 0,5 m/s, 1 m/s, 2 m/s