Change Language :

e-spool® standard and HD options

With the e-spool® standard and the HD version, cables in an energy chain are wound up in a space-saving manner. By using the twisterband, a wide variety of media can be guided without interruption. This means that adjustments and extensions of the filling system can also be made at any time.

More flexibility:

Unlike e.g. sliding contacts, cables for data, compressed air and liquids can also be connected continuously and, above all, exchanged or changed at any time.

  • Variable energy supply - routing of all media in one system
  • Can be used in a variety of ways - energy supply possible in all directions
  • Inexpensive - twisterband allows rotational movement
  • Space-saving - energy chain rolled up in the starting position, the paths remain clear
  • No tensile load on the cables
  • Cables can be added and changed at a later date
  • iF Product Design Award 2013
Contact an expert
e-spool side view
e-spool side view

Technical data

  • Speed v - Max. 1 m/s
  • Acceleration - Max. 2 m/s
  • Transverse speed - Max. 1 m/s
  • Lateral acceleration - Max. 1 m/s2 (radial) /0.25 m/s2 (axial)
  1. Versatile uses: energy can be supplied in all directions
  2. Low cost: twisterband enables rotary movement
  3. Variable energy supply system: guidance of all media in one system
  4. Space saving: e-chain® rolled up in the start position, keeping paths clear
e-spool® application examples

Filling rules for the e-spool® with manual pull out cable

Due to the special mechanical stress in an e-spool, we recommend using our chainflex cables. In addition, we recommend adhering to the following filling rules:

1. In the linear chain, cables must only be placed next to each other - never lay several cables on top of each other!
2. In the case of unshielded cables, chainflex cables with a TPE outer sheath should be used if possible.
3. Shielded cables should come from the chainflex cable family, CFROBOT family.
4. The maximum bending radii of the twister belt used must be adhered to.
5. If possible, protect cables with dividers to prevent them from rolling over and abrasion against each other. To make the best possible use of the interior space, install the divider alternately in segments one behind the other.
6. Insert cables sorted by diameter or bending radius - insert thin, small, inwardly and outwardly increasing larger ones.
7. Relieve tension at both ends of the line. The cable tie knot must not be mounted in the direction of the chain.
8. The cables should be laid in the twisterband in such a way that they have some distance/space reserve both outwards and inwards to the axis of rotation.

Installation instructions

In the case of a horizontal application, a smooth surface must be provided on which the energy chain can move.

Assembly Instructions: e-spool®

e-spool manual pull

Discuss your project with an expert!

Whether you're interested in end-to-end, fully assembled solutions or looking to build your own customizable project, let us assist you with a solution based on your specific application and requirements. Contact us via the form below or call us at (800) 521-2747  to discuss your project today!