iglide® Q | For high loads - wear-resistant on many shafts- Excellent wear resistance, especially for extreme loads
- Recommended for extreme pv values
- Good coefficients of friction
- Resistant to dirt
- Dry-running and maintenance-free
- Standard range from stock
iglide® Q bearings were developed especially for extreme loads. Under high loads, iglide® Q figures among the iglide® materials that display the best wear
resistance. From a radial pressure of 3625 psi, it outclasses even bearings made from the extremely abrasion resistant iglide® L280. Specific solid lubricants, precisely integrated into the material, ensure that the maintenance-free dry operation is guaranteed under any load.
Typical application areasAgriculture equipmentConstruction machineryRailway technologyYou will find plenty of additional application areas here:
Browse all Industries When to use it?- For oscillating applications
- Excellent wear resistance, especially for extreme loads
- Recommended for extreme pv values
- If you need dirt-resistant bearings
| When not to use?- For underwater applications
- If temperatures are constantly higher than +275 °F
- In situations involving high edge loads or strong impact loads
Use our filter options to find the most suitable product |
Tolerances and measurement systemThe installation dimensions and tolerances of the iglide® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Testing methods Assemblyiglide® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
Certificates and standards