Series R780, energy tube

Option 1: Vertical separators and spacers

Vertical separators are used if a vertical subdivision of the Energy Chain® interior is required. By standard, vertical separators are assembled every other Energy Chain® link. NOTE: Observe a lateral spacing of at least .98 in. (25mm) for Energy Tubes

Standard separator 381 for Energy Chains® and Energy Tubes
This separator offers safe stability due to its wide base design, also when used with thick cables or hoses.

Locking separator 380T for Energy Tubes
It clamps to the fixed radius and remains free along the other radius to facilitate lid removal. When installing please ensure they are identically aligned.

Vertical separator 383 for Energy Chains®
This separator features an increased retention force for applications exposed to very high humidity or extreme loads. It features asymmetric claws for the crossbar which results in the increased retention force.

Option 2: Shelves

Energy Chains® and Energy Tubes can be subdivided both vertically and horizontally using the various interior separation elements.

Side plates 386
This component is used to form the basic pattern of a shelf system.<

Vertical separator 388
This component is used to form the basic pattern of a shelf system.

Closed Slotted separators 391
These are used for complex subdivisions. However, they cannot be retrofitted into an existing interior separation system without removing the shelves first.

Open slotted separator 397
This separator can be retrofitted into an existing interior separation system without removing the shelves, as long as these shelves fit into the middle 3 slots only.

Shelves 386-XX
These components form the basic pattern of a shelf system. Shelves of various widths can be arranged at 5 different heights in .28” (7mm) increments

Strain reliefs

Strain reliefs

• Excellent wear and noise levels
• Very easy, universal assembly

1. Interface connector

2. Polymer glide bar

3. Bottom clamp

4. Glide strip

5. C-Profile

• Excellent wear and noise levels
• Very easy, universal assembly

1. Aluminium profile

2. Polymer glide bar

3. Heavy Duty bracket

4. Glide strip

5. C-Profile

6. Silencer profile

+ Easy assembly with installation sets
+ 2-part design - adaptable to chain widths
+ Very stable
+ Economical
+ Large selection

Guide trough without glide bars part no. 93-30, guide trough with glide bars part no. 93-31

Installation sets as a joint connection part no. 93-50. XX