igus® - igus® chain tiewrap plate

Shopping Cart

Order fast

igus® chain tiewrap plate

Personal contact

Variants

Chainfix tiewrap plates as individual parts

Tiewrap plates with snap-open connection

Integrated strain relief for E2 tube type series R

Tiewrap plates for fixed or snap-open crossbars

Features of igus® chainfix
tiewrap clamp series 2000 Option 1A | Series 3000 Option 1B:

Available as individual component
Screwed on KMA* with C-profile (*polymer metal mounting bracket)
Can be stacked onto the mounting bracket
Single part for the manufacturing of switchgear cabinets or for the assembly of machines
Accessory for igus® e-chainsystems®


Part No. :
Number of teeth :
A [inch]:
B [inch]:
C [inch]:
Center drilling available :

Option 1: Series 2000 - Tiewrap clamps as single component - for the following e-chains®:

easy chain® Series

E200/Z200

System E2/000 Series

1400/1500/1450/1480
2400/2500/2450/2480
255

E2 e-tubes

R117/R118
R48

System E4.1

E4.21
E4.28

System E4/00 Series

220 (2050.Z)

System E6 Series

E6.29/R6.29
E6.35
E6.40
E6.52

Series 3000 - Tiewrap clamp as single part - for the following e-chains®:

easy chain® Series

E26/Z26
E300/Z300

System E2/000 Series

2600/2700/2650/2680
3400/3500/3450/3480

System E4.1 Series

E4.32/H4.32/R4.32
E4.42/H4.42/R4.42
E4.56/H4.56/R4.56
E4.80/H4.80/R4.80
1640
800
840

System E4/light Series

14040/14140/18840
14240/14340
14550/14650/19050
15050/15150/19850
15250/15350

System E4/00 Series

280/290/R770
380/390/R780/400/410/R880/600/601/R608/640
System E4/4 Series 2828/2928/R7728/3838/3938/R7828/4040/4140/R8840/5050/5150/R9850
System E6 Series E6.62/E6.80L/E6.80

GToB Imprint General notes Data protection declaration

Features of igus® chainfix
tiewrap clamps Option 2 With clip-on connection for the C-profile

Can be clipped into the KMA C-profile
Easy to assemble without any screws
Easy to remove with screwdriver but secure when in use
Single part for the manufacturing of switchgear cabinets or for the assembly of machines
Accessory for igus® e-chainsystems®


Part No. :
Number of teeth :
C [inch]:

Option 2: Tiewrap plates with snap-open lock for the C-profile – for the following e-chains®:
For all mounting brackets with C-profile option

GToB Imprint General notes Data protection declaration

Features of igus® chainfix
tiewrap clamps Option 3 integrated strain relief for E2 tubes Type series R

Strain relief disappears within the e-tube
Easy to assemble without any screws
Single part for the manufacturing of switchgear cabinets or for the assembly of machines
Accessory for igus® e-chainsystems®


Part No. :
Number of teeth :
C [inch]:

Tiewrap clamps Option 3: Integrated strain relief for the following tubes:

GToB Imprint General notes Data protection declaration

Features of igus® chainfix
tiewrap clamps Option 4: For fixed crossbars or Option 5: For crossbars

Can be plugged on fixed and opening crossbars
In case of many harnessed cables
Strain relief on two levels
If the KMA is too small for the C-profile
Easy to assemble without any screws
Accessory for igus® e-chainsystems®

Tiewrap clamps Option 4: For fixed crossbars or Option 5: for crossbars
Option 4 | Tiewrap clamp for fixed crossbars

2050.Z - for Series E/Z200, 2400/2500, 2600/2700
3050.Z - for Series 3400/3500
3075.Z - for Series 3400/3500

Option 5 | Tiewrap clamp for cross bars

2050.Z - for Series 220,2650
3035.ZS - for Series 3400/3500
3050.ZS - for Series 3400/3500
3075.ZS - for Series 3400/3500
3850.ZS - for Series E4/H4/R4.56, E4/H4/R4.42, 280/290/R770, 380/390/R780, 2828/2928/R7728, 3838/3938/R7838, 14240/14340, 15250/15350, E6.52, E6.80
4550.ZS - for Series E4/H4/R4.56, E4/H4/R4.80, 400/410/R880, 4040/4140/R8840, 5050/5150/R9850, 14040/14140/18840
,14550/14650/19050, 15050/15150/19850, E6.80L, E6.80
4575.ZS - for Series E4/H4/R4.56, E4/H4/R4.80, 400/410/R880, 4040/4140/R8840, 5050/5150/R9850, 14040/14140/18840, 14550/14650/19050, 15050/15150/19850, E6.80L, E6.80

GToB Imprint General notes Data protection declaration