iglide® F

iglide® F: Lightning Conductor

iglide® F plastic bushings are electrically conductive and ideal for high loads. They are self-lubricating, but display their full mechanical potential with additional lubrication.

Personal contact

Ask the product expert

Variants

Sleeve bushing (metric sizes)

Flange bushing (metric sizes)


Part No. :
Shaft diameter d1 [inch]:
Bearing length b1 [inch]:
Outer diameter d2 [inch]:
d1-Tolerance min. [inch]:
d1-Tolerance max. [inch]:

(Dimension according to ISO 3547-1 and special dimensions)
Recommended tolerance for the installation:
- Housing bore H7
- Shaft h9
For b1, tolerance field h13 is applicable .

Chamfer depending on d1

d1 [mm]:	Ø 1-6	Ø 6-12	Ø 12-30	Ø > 30
f [mm]:	0,3	0,5	0,8	1,2

With the selected part you'll arrive at:

PDF file 3D-CAD Samples and catalog order

Application examples

Material data

Life time calculation

test method

installation

GToB Imprint General notes Data protection declaration


Part No. :
Shaft diameter d1 [inch]:
Bearing length b1 [inch]:
Flange thickness b2 [inch]:
Outer diameter d2 [inch]:
Flange diameter d3 [inch]:
d1-Tolerance min. [inch]:
d1-Tolerance max. [inch]:

b1-Tolerance :	h13
b2-Tolerance :	-0,14
d3-Tolerance :	d13

(Dimension according to ISO 3547-1 and special dimensions)
Recommended tolerance for the installation:
- Housing bore H7
- Shaft h9

r = max. 0,5 mm

Chamfer depending on d1

d1 [mm]:	Ø 1-6	Ø 6-12	Ø 12-30	Ø > 30
f [mm]:	0,3	0,5	0,8	1,2