Glide shoes 'Auto Glide' for the Series 240. Every 39.37 to 78.74 (1000 - 2000 mm), special plastic glide shoes are mounted laterally on the chain link. They provide the precise lateral guidance and a smooth glide of the E-Chain®.
Inner widths Bi: 0.98 up to 4.92 (25 - 125 mm)Bending radii R: 2.17 up to 4.92 (55 - 125 mm)Pitch: 1.81 (46 mm) per link = 7 links/ft (22/m)
** The calculated length corresponds to the chain length without mounting brackets.
Samples and catalog order
E-Chain® Expert call
Service life calculation
E-Chain® product finder
Ask the product expert
Designing with igus®
7 widths and 4 bending radii
Series 240 as starting chain
Especially for long travels
Option 1. Separators
Option 2. Shelving
Option 3. Shelves
At the same time, separators are the only possibility of dividing the interior of the non-snap-open Type 200 chain. Separators with a wider base (not Series 200) limit the distance between 2 crossbars to 1.02 (26 mm). Spacers perform the same function. Both methods are used predominantly in the case of side-mounted chains.
This possibility is only available for the Type 240/250 snap-open chains. It is useful if many thin cables with similar or identical diameters are employed. This variant always fills the entire inner width of the chain.
This possibility is available for the Type 240/250 snap-open chains. It is useful if many cables with different diameters are employed. Continuous interior separation from chain side to chain side as well as partial division into individual blocks can be achieved.
1. Polymer mounting brackets "pivoting" – standard
2. Polymer mounting brackets "locking"
3. KMA "pivoting"
4. KMA "locking"
Data protection declaration